BSSVJ - PWC POLYURETHANE AEROSOL COLORS, PWC 296
- MSDS: BSSVJ
- Manufacturer: PACIFIC WEST CHEMICAL CORP
- Product Name: PWC POLYURETHANE AEROSOL COLORS, PWC 296
- National Stock Number: 8010-00N041605
Product Identification
Product ID:PWC POLYURETHANE AEROSOL COLORS, PWC 296
MSDS Date:04/12/1990
FSC:8010
NIIN:00N041605
MSDS Number: BSSVJ
Responsible Party
US
Emergency Phone: 415-924-4560
Info Phone: 415-924-4560
Cage: 58977
Contractor
Telephone: 415-924-4560
Cage: 58977
Ingredients
(ORAL RAT) 9750 MG/KG
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 27%
OSHA PEL 750PPM; 1000 STEL
ACGIH TLV: 750PPM; 1000 STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
(ORAL RAT) 2500 MG/KG
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 12%
OSHA PEL 100 PPM; 150 STEL
ACGIH TLV: 50 PPM, S
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 15%
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
PROPANE, 2-METHYL-; (ISOBUTANE)
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: <5%
BUTANE
CAS: 106-97-8
RTECS: EJ4200000
Fraction By Weight: 5%
OSHA PEL 800 PPM
ACGIH TLV: 800 PPM
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOTE:TOLUENE APPEARS ON NAVY LISTING
OF OCCUP CHEM REPROD HAZARDS. SEEK CONSULTATION FROM APPROP HLTH
PROFESSIONALS CONCERNING LATEST HAZARD LIST INFO & SAFE HNDLNG &
EXPOS RECOMMENDATIONS . ACU TE/CHRONIC: INHAL: ANESTHETIC. IRRIT
OFRESP TRACT OR NERVOUS SYSTEM DEPRESS CHARACT BY HDCH, DIZZY,
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:NAUSEA OR POSSIBLE UNCONSCIOUSNESS.
SKIN/EYE CONTACT:PRIMARY IRRITATION. MAY CAUSE IRRITATION OR
BURNING SENSATION. PROLONGED OR REPEATED CONTACT TO SKIN MAY CAUSE
DERMATITIS. EXERCISE DUE CA RE. INGEST:NOT APPLICABLE.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.
First Aid
First Aid:INHAL:REMOVE FROM EXPOSURE & RESTORE BREATHING. SEEK MEDICAL
ATTENTION. SKIN:WASH AFFECTED AREA. REMOVE CONTAMINATED CLOTHING.
SEEK MD IF ANY IRRITATION PERSISTS. EYES:FLUSH IMMEDIATELY W/WATER
FOR AT LEAST 15 MINS & TAKE TO MD. INGEST:CALL MD IMMEDIATELY .
Fire Fighting
Flash Point Method:TCC
Flash Point:-18F,-28C
Lower Limits:1.2%
Upper Limits:12.8%
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL OR
WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROTECTIVE
EQUIP . WATER SPRAY MAY BE INEFT, BUT MAY BE USED TO COOL CONTRS
EXPOSED TO HEAT/FIRE TO PVNT PRESS BUILDUP.
Unusual Fire/Explosion Hazard:CLOSED CONTAINER MAY EXPLODE DUE TO BUILD
UP OF PRESSURE FROM EXTREME HEAT OR FIRE. AEROSOL SPRAY IS
EXTREMELY FLAMMABLE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION:SPARKS, FLAMES,
STATIC ELECTRICITY & ELECTRICAL. VENTILATE AREA & SOAK UP W/INERT
ABSORBENT USING NON-SPARKING TYPE TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. DO NOT STORE
OR USE NEAR HEAT, SPARKS OR FLAME. DO NOT GET IN EYES. DO NOT
BREATHE VAPORS. AVOID SKIN CONTACT.
Other Precautions:DO NOT TAKE INTERNALLY. SMOKING WHILE USING PRODUCT
MUST BE STRICTLY PROHIBITED. IN ADDITION TO ALL OTHER HAZARDS &
PRECAUTIONS, DUST FROM SANDING DRY PAINT FILMS SHOULD BE TREATED AS
A NUISANCE DUST W/A TLV OF 10 MG/M3.
Exposure Controls
Respiratory Protection:WE RECOMMEND A NIOSH/MSHA APPROVED PARTICULATE
FILTER TO REMOVE ANY AIRBORNE OVERSPRAY. IN RESTRICTED AREAS W/POOR
VENTILATION & CLOSE TO TLV, A NIOSH/MSHA APPROVED RESPIRATOR
W/ORGANIC VAPOR CARTRIDG E IS RECOMMENDED.
Ventilation:ALL APPLICATION AREAS SHOULD BE ADEQUATELY VENTD IN ORDER
TO KEEP INGREDS FROM INGRED SECTION BELOW THEIR EXPOS LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EYE WASH FOUNTAIN & SAFETY SHOWER.
IMPERVIOUS APRON TO PREVENT SKIN CONTACT IS RECOMMENDED.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING PRIOR TO REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:-10F,-23C
Vapor Density:HVR/AIR
Spec Gravity:0.6 (H*2O=1)
Evaporation Rate & Reference:FASTER THAN N-BU AC
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE LIQUID; SOLVENT BASED ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
HYDROGEN CHLORIDE & POSSIBLY TRACES OF PHOSGENE.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.